Video setup
Setting |
Description |
---|---|
Payload |
Select integrated camera •EYE X •EYE-X-HD •FPV NOTE: EYE X HD option is for (EYE X HD, EYE X HD 2 and EYE X HD 4 camera) |
Bit rate |
Set video bit rate of video stream (system specific). |
FILE |
With this button you can open and play a recorded video in C3P. |
By default for IP equipped UAV, when UAV ID is typed in, the source for the selected payload will be automatically obtained. IMPORTANT: If manually option is selected then type in your camera address in the camera field. Drop down menu contains the list of available video cameras. USB video sources or cameras integrated in the systems have various names like "HP HD CAMERA". Here are some examples of video stream sources that can be used for the camera field: •rtsp://192.168.0.90:554/axis-media/media.amp (This is usually used for C4EYE with analog video radio link) •udp://@169.254.0.4:15004 (This is usually used for C4EYE EYE X with digital video radio link) •udp://@225.11.1.0:11024?localaddr=169.100.1.100 (This is usually used for C4EYE EYE XHD 4 with digital video radio link) •NONE is selected if the system does not have a video option. |
|
Configure VPU |
Option to set up the Video processing unit (Only wen ADVANCE is enabled). |
Browse VPU |
This enables browsing videos on SD card mounted to the system. |
Decryption |
Opens Decryption Window that allows the user to decrypt the encrypted videos recorded on SD card. |
Video settings.
Video overlay
Setting |
Description |
---|---|
Enable C3P Video Overlay |
If this option is enabled then video data (camera position, target position, camera heading) are displayed on the video window. |
Show graphical heading in video overlay |
Graphically displays heading of the camera and the UAV during flight. |
Show north letter in video overlay |
Displays north arrow in video window during flight |
Graphically displays video inside the camera view on the map. |
|
Show extend buttons in full screen mode |
Full screen video window shows additional buttons that open/close UAV flight panel displayed over the video. |
Video overlay.
Recordings
Setting |
Description |
---|---|
Auto start record on gimbal extended (Airborne) |
This enables automatic recording of video when gimbal is extended. |
Record video also on PC (no metadata) |
This option enables recording on PC. Video will not contain meta data. |
Enable C3P video overlay in Recordings |
If this option is enabled then video data (camera position, target position, camera heading) are recorded on the video. |
Record video also on PC (with metadata) |
This option enables recording on PC. Video will contain meta data. |
Recording settings.
Analog video
Setting |
Description |
---|---|
Channel selector |
Only for analog system. Some analog systems have a possibility to select radio channel on which video is received. If this option is enabled you have to select: Select the correct frequency of the video transmitted from UAV to be received on the GCS, |
Enable Analog Video |
This option turns on or off the analog video transmitter on the airplane (system specific). |
Channel |
Select the correct frequency of the video transmitted from UAV to be received on the GCS, |
Port |
IP/ port combination for video channel selector and then select. |
Analog settings.